Watertight Hatch

• Our Watertight Hatch is manufactured from 8mm thick cover plate
• Suitably stiffened with weld on ribs
• Fitted with a 40 x 25 EPDM section perimeter seal
• Secured by 4 clamping points linked together
• Operated from above by a portable T key and below by a stainless steel central hand wheel
• Supplied with a channel section frame to leave the cover flush with the deck when fully closed.
• Suitable for welding directly to the structure.
• 2 off flush lifting points
• Shot blast SA2.5 after fabrication and primed one coat primer.