Watertight Hatch
- Our Watertight Hatch is manufactured from 8mm thick cover plate
Suitably stiffened with weld on ribs - Fitted with a 40 x 25 EPDM section perimeter seal
- Secured by 4 clamping points linked together
- Operated from above by a portable T key and below by a stainless steel central hand wheel
- Supplied with a channel section frame to leave the cover flush with the deck when fully closed.
- Suitable for welding directly to the structure.
2 off flush lifting points - Shot blast SA2.5 after fabrication and primed one coat primer.
